Testimonials
|
|||||
|
|||||
Garage Door FAQ
Q: How much do garage doors cost?
A: The cost of a garage door depends on a number of factors such as: the model, size, material, decorative options and site conditions. Give us a call for the most up-to-date prices.
Q: I am getting ready to remove my old garage door, which has standard torsion springs. How can I get the tension off the springs?
A: Unwinding standard torsion springs requires specific tools and training. Due to the dangerous nature of this process, we highly recommend that have a door professional remove the tension from the springs.
Q: I do not have standard size door openings. Can custom garage doors be made to fit my needs?
A: The standard sizes of garage doors are 16’x 7’ or 8’ x 7’, if your opening is smaller or larger, then cuts can be made to the door or additions to the frame can also be done.
Q: Does my garage door require maintenance?
A: The garage door is the biggest moving part on your home, and perhaps the hardest working, being raised and lowered numerous time a day. Like any other area of the home, it needs regular inspections and maintenance. We suggest that you perform the recommended garage door maintenance as listed in your installation manual on an annual basis.
Q: Are replacement sections available for my garage door?
A: Yes, replacement sections for steel and wood garage doors are available provided that they are still manufactured. However, in some cases, it is more cost-effective to purchase a new door rather than a special order section.
Q: Why should I choose an insulated door if my garage is not insulated?
A: A garage door opening is very large. Insulated doors will help to reduce the transfer of heat or cold air into your garage.
Q: What type of spring is better...extension or torsion?
A: The two types of springs used on garage doors today are extension and torsion springs. Extension springs are attached on either side of the door and stretch along the horizontal track when the door is closed. Torsion springs are typically located just above the top section of the door and are mounted to the header. They are wound springs and do not expand or contract when the door is moved. Some homeowners prefer torsion springs because these springs offer more safety and provide better balance to the door for smoother operation.
Q: How do I know if my door is properly balanced?
A: There are several tests you can perform to tell if your door is balanced. Before testing your door, disengage you electronic opener. You can start by raising your door in 1' increments, and the door should stay in place. When you lower the door, the door lowers in a controlled manner and doesn't slam down. Finally, when the door is fully-raised in the open position, the bottom of the door should be aligned with the bottom of the header of the door opening.
Q: When I replace my existing door, can I keep my old track?
A: It is recommended that you replace the track when you replace your door because each brand of garage door has been specifically designed to work with a specific type of track. In addition, replacing your track is an inexpensive way to insure that your entire garage door system is as safe as possible. By replacing your track you also ensure that your door warranty will apply, in the event that you have a problem.
Q: I have a one-piece door now. Can I replace it with a sectional door?
A: Yes. Your professional garage door dealer/installer can install a sectional door for you by installing track and springs to accommodate a sectional door. Depending on the construction of your garage, other modifications might be necessary. We would advise you to ask your dealer to evaluate the job prior to installation, so that any required modifications can be performed.