Routine Maintenance Keeps Your Garage Door Opener Working
Monthly garage door opener maintenance keeps your unit working smoothly and efficiently for years. Follow these maintenance steps for many years of trouble free operation.
Garage Door Maintenance
Your opener won't work well unless the door is properly adjusted and maintained.
Start with a visual inspection of all brackets, hinges, fasteners, springs and door tracks.
If rollers are worn, they should be replaced.
Bent brackets should be straightened or replaced.
Make sure all bolts and screws are properly tightened.
Oil hinges and rollers, but not the tracks.
Do not oil plastic rollers.
Oil on the tracks will cause dirt accumulation.
Use a silicone spray oil.
Spray springs with WD-40
If tracks have a buildup of dirt or oil/grease, clean with disc brake cleaner.
To check spring adjustment, make sure the door is fully closed, then pull the release cord or chain to release door from opener.
If the garage door opener is released with the door open, there is the danger that the door will fall. Doors are heavy and a falling door can cause serious injury and damage.
With the operator disconnected, open door halfway. When released, the door should not move more than an inch or two. If it does, springs require adjustment or replacement.
If springs need adjustment, follow manufacturers instructions precisely. Torsion springs should only be adjusted by a professional. Torsion springs are mounted above the door and are very dangerous.
Extension springs should only be adjusted when the door is fully opened to release tension on the springs. Also keep in mind that the bottom spring brackets are under extreme tension when the door is closed, so don't attempt to tighten, or especially loosen these brackets, with the door less than fully open.
If springs need replaced, replace both. Replacing only one spring will cause an improperly operating door.
The door should open and close easily and smoothly.
Garage Door Opener Maintenance
Inspect mounting brackets, cables, fasteners, etc.
Replace bent or broken parts
Tighten loose bolts or screws
Lubricate chain or screw drive
Perform safety reversing test
Lay a 2X4 on the floor under the door
Operate door opener - door should reverse when it comes in contact with the obstruction (the 2X4)
If it does not reverse, have your door opener adjusted.
If you try this yourself, follow manufacturers directions precisely.
Improperly adjusted doors can be very dangerous to small children and pets
If your garage door opener is equipped with a photoelectric beam, placing an obstruction between the sensors should prevent the door closing
Clean the lenses
Making regular monthly garage door opener maintenance a habit will give you many years of trouble free operation.
Los AngelesGarage Door Repair
Struggling to get your garage door inspected or fixed? Call us at Los Angelesgarage door to have your screw or chain driven garage door refurbished, repaired, inspected or modified. We can fix any brand's chain systems, folding doors, electrical/mechanical issues, sliding gates, overhead doors, or openers. Los Angelesgarage door can also support replacing garage doors and openers if a garage is too damaged to continue using.
Los Angeles, Manhattan Beach, Westwood,Encino, Hermosa Beach, Santa Clarita, Sherman Oaks, Laguna Beach, Van Nuys, Studio City, Laguna Niguel, Burbank, Pasadena, Santa Ana, Glendale, Beverly Hills, Agoura Hills, Culver City Santa Monica, Altadena, Brentwood, Thousand Oaks, Anaheim , Malibu ,Newberry Park, Arcadia, Garden Grove, Canoga Park, Reseda, San Juan Capistrano, Tustin, Winnetka, Mission Viejo, Irvine, Chatsworth, Yorba Linda, Newport Beach, Tarzana, Long Beach, Huntington Beach, Simi Valley, Redondo Beach.